Performance for A3S

Model Tube	Tubing Material	Feed Rate			Max Speed	Max Pressure	Max Temp
		GPH	LPH	mL/Min	RPM	PSI(bar)	°F(°C)
A3-*ND-T	Flex-A-Prene	.001 – 2.1	.003 – 7.8	.06 – 132	125	125 (8.6)	185 (85)
A3-*NEE-T	Flex-A-Prene	.002 – 4.76	.007 – 18.0	.12 – 300	125	110 (7.6)	185 (85)
A3-*NGG-T	Flex-A-Prene	.007 – 19.02	.026 – 72.0	.48 – 1200	125	110 (7.6)	185 (85)
A3-*NHL-T	Flex-A-Prene	.006 – 17.39	.022 – 65.8	.38 – 1097	125	65 (4.5)	185 (85)
A3-*NK-T	Flex-A-Prene	.013 – 33.3	.050 – 126.0	.82 – 2100	125	125 (8.6)	185 (85)
A3-*NKL-T	Flex-A-Prene	.013 – 33.3	.050 – 126.0	.82 – 2100	125	30 (2.1)	185 (85)
A3-*TH-T	Flex-A-Chem	.006 – 15.06	.022 – 57.0	.38 – 950	125	50 (3.4)	130 (54)
A3 - * TK-T	Flex-A-Chem	.011 – 28.5	.043 – 108	.72 – 1800	125	50 (3.4)	130 (54)
A3-*GE-T	Flex-A-Thane	.002 – 4.60	.007 – 17.4	.13 – 290	125	65 (4.5)	130 (54)
A3-*GG-T	Flex-A-Thane	.004 – 10.1	.015 – 38.4	.25 – 637	125	65 (4.5)	130 (54)
A3-*G2G-T	Flex-A-Thane	.007 – 18.23	.03 – 69.0	.46 – 1150	125	65 (4.5)	130 (54)
A3-*GH-T	Flex-A-Thane	.010 – 24.9	.038 – 94.2	.63 – 1570	125	65 (4.5)	130 (54)
A3-*GK-T	Flex-A-Thane	.011 – 28.5	.043 – 108.0	.72 – 1800	125	65 (4.5)	130 (54)

Fitting connections for A3S pump = *

“S” = 3/8” OD x 1/4” ID Tube Compression Fitting

“M” = 1/2” Male NPT

“B” = 1/2” Hose Barb

“C” = ½” – ¾” Tri-Clamp

“Q” = Quick Disconnect

“MB” = 1/2 Male BSPT

Maximum Viscosity: 5,000 Centipoise

Maximum Suction Lift: 30 ft at sea level (14.7 atm psi)

Electrical and Controls

Electrical Power Requirement: 100 to 240VAC, 50/60Hz

Motor: Brushless DC, 2,500:1 Turndown, Continuous Duty

Power cord options available (6 feet length):

• 115VAC 50/60HZ, NEMA 5/15 plug (U.S.) – (choose when specifying pump model)
• 220VAC 50/60HZ ,CEE 7/V11 plug (EU) – (choose when specifying pump model)
• 230VAC 50/60HZ, NEMA 6/15 (U.S.) – (ordered separately)
• 240VAC 50/60HZ, AS 3112 plug (Australia / New Zealand) (ordered separately)
• 230VAC 50/60HZ, BS 1363/A plug (UK) (ordered separately)

Signal Connectors: M12 – 5 pin, IP67 rated connectors

Inputs:

• 4-20 mA – fully configurable
• Frequency / Pulse input – fully configurable
• Stop/Start Dry Contact Closure (Configurable for N.O. or N.C.)
• Auto Prime – Secondary Contact Closure
• FVS (Flow Verification System) (Flow sensor provided by others)

Outputs:

• 4-20 mA output – fully configurable
• Frequency output (Open collector)
• Four (4) Alarm Outputs – Programmable.

Materials of Construction

Pump Head: Valox® (PBT)

Pump Head Cover: Polycarbonate, with permanently sealed motor shaft support bronze sleeve bearing.

Cover Screws: Stainless steel, polypropylene cap.

Roller assembly: Rotor – Valox, Rollers – Nylon.

Motor Shaft: Chrome-Plated Steel

TFD Sensor: Hastelloy C

Power Cord: 3 Conductor, SJTW-A water-resistant

Mounting Brackets: 316 Stainless Steel (standard and extended)

Enclosure: NEMA 4X (IP66) Valox

Tube Fittings: PVDF (part of tube assembly)

Tube Assembly Options

Flex-A-Prene® tubing:– An excellent material for most water treatment applications. Chemically resistant to 25% Sodium Hypochlorite, 30% Sulfuric Acid, 30% Fluosilicic Acid, Ferric Chloride, Alum and many others.

Flex-A-Chem® tubing:– This material consists of an outer Norprene jacket with an inner liner that is virtually unaffected by acids, bases, salts, ketones, and alcohols.

Flex-A-Thane® tubing:– This polyurethane material can be used with a variety of chemicals, including Oil and Water based Polymers, fuels and lubricants, and many others.

Flex-A-Prene®, Flex-A-Chem®, and Flex-A-Thane® tubing comply with FDA 21 CFR, 117.2600 criteria for food processing.

Dimensions and Weights

Maximum Overall Dimensions: 8.25” W x 11.75” H x 13.25” D (20.9 W x 29.8 H x 34.5 D cm)

Product Weight: 25.4 Lb. (11.5 Kg)

Approximate Shipping Dimensions: 16” W x 17” H x 22” D ( 40.5 W x 43 H x 56 D cm)

Approximate Shipping Weight: 35 lb. (16.0kg)

Agency Listings

CE

cETLus

RoHS Compliant