Performance
| Model Tube | Feed Rate | Max Speed | Max Pressure | Max Temperature | ||
| GPH | LPH | mL/Min | RPM | PSI(bar) | °F(°C) | |
| 1 | 0.001 – 1.09 | 0.002 – 4.13 | .035 – 69 | 65 | 65 (4.50) | 130 (54) |
| 3 | 0.003 – 5.60 | 0.011 – 21.2 | .176 – 353 | 65 | 50 (3.45) | 130 (54) |
| 4 | 0.001 – 0.44 | 0.001 – 1.68 | .014 – 28 | 65 | 100 (6.89) | 130 (54) |
| 6 | 0.001 – 1.35 | 0.003 – 5.14 | .043 – 85 | 65 | 100 (6.89) | 185 (85) |
| 7 | 0.004 – 4.17 | 0.0158 – 15.8 | .132 – 263 | 65 | 50 (3.45) | 185 (85) |
| 8 | 0.003 – 3.09 | 0.0117 – 11.7 | .098 – 195 | 65 | 50 (3.45) | 130 (54) |
Maximum Fluid Temperature: 185 °F (85 °C)
Maximum Viscosity: 5,000 Centipoise
Maximum Suction Lift: 30 ft at sea level (14.7 atm psi)
Electrical and Controls
Electrical Power Requirement: 100 to 240VAC, 50/60Hz
Motor: Brushless DC, 50W, 2,000:1 Turndown, Continuous Duty
Power cord options available (6 feet in length):
- 115VAC 50/60HZ, NEMA 5/15 plug (U.S.) – (choose when specifying pump model)
- 220VAC 50/60HZ, CEE 7/V11 plug (EU) – (choose when specifying pump model)
- 230VAC 50/60HZ, NEMA 6/15 (U.S.) – (ordered separately)
- 240VAC 50/60HZ, AS 3112 plug (Australia / New Zealand) (ordered separately)
- 230VAC 50/60HZ, BS 1363/A plug (UK) (ordered separately)
年代ignal Connectors: M12 – 5 pin (IP67 rated connectors on “V” models)
Inputs:
- 4-20 mA – fully configurable (V models only)
- 年代top/Start Dry Contact Closure (Configurable for N.O. or N.C.)
- FVS (Flow Verification System) (Flow sensor provided by others)
Outputs:
- 4-20 mA output – non-scalable (V models only)
- Alarm Output – TFD+ (leak detection) and FVS (flow verification – flow sensor ordered separately)
- Motor On Status – open collector output
Materials of Construction
Pump Head: Valox® (PBT)
Pump Head Cover: Acrylic, with permanently sealed motor shaft support bronze sleeve bearing.
Cover Screws: Stainless steel, polypropylene cap.
Roller assembly: Rotor – Valox, Rollers – Nylon, Roller bearings – Bronze.
Motor Shaft: Chrome Plated Steel
TFD+ Sensor: Polysulfone (PES)
Power Cord: 3 Conductor, SJTW-A water-resistant
Mounting Brackets: GF Nylon bracket, 316 Stainless Steel
Enclosure: NEMA 4X (IP66) Valox
Tube Assembly Options
Flex-A-Prene® tubing:An excellent material for most water treatment applications. Chemically resistant to 25% Sodium Hypochlorite, 30% Sulfuric Acid, 30% Fluosilicic Acid, Ferric Chloride, Alum, and many others.
Flex-A-Chem® tubing:This material consists of an outer Norprene jacket with an inner liner that is virtually unaffected by acids, bases, salts, ketones, and alcohols.
Flex-A-Thane® tubing:This polyurethane material can be used with various chemicals, including Oil and Water based Polymers, fuels and lubricants, and many others.
Dimensions and Weights
Maximum Overall Dimensions: 9.5” W x 9.5” H x 10.4” D (24.1 W x 24.1 H x 26.4 D cm)
Product Weight: 8.5 Lb. (3.8 Kg)
Approximate Shipping Dimensions: 10.5” W x 11.75” H x 13” D (26.7 W x 29.8 H x 33 D cm)
Approximate Shipping Weight: 15.5 lb. (7.0kg)
Agency Listings
CE
cETLus
RoHS Compliant
FAQs
Frequently Asked Questions
A1 Specifications
-
What is the accuracy of the A1?
+/- 5% Full Scale Accuracy (PM)
-
What is Flex-A-Prene?
Blue-White’s® Flex-A-Prene® tubing is a type of Thermoplastic Elastomer (TPE) or Thermoplastic Rubber specifically designed to offer long life in peristaltic chemical metering pump applications and to provide superior chemical resistance against most water treatment chemicals. The material exhibits remarkable memory properties resulting in excellent flow repeatability in peristaltic pumping applications.
Flex-A-Prene® tubing is capable of operating against system pressures as high as 125 PSI (8.6 bar) and continuous operating temperatures as high as 185F (85C). The tubing is suitable for use in CIP (Clean-In-Place) sanitary applications and is autoclavable.
Flex-A-Prene® tubing fully complies with FDA 21 CFR, 177.2600 criteria for food contact.
Flex-A-Prene® is a registered trademark of Blue-White Industries.
-
What is maximum allowable voltage on Motor On/Out function P1 Pin?
Max +60V DC on loop or sink.